Replacement Handles For UPVC Windows
UPVC window handles are available in a variety of styles, but they all have the same locking mechanism. To replace a uPVC window handle, take off the top screw located at the base of the handle. This will reveal two screws.
Then, take a measurement of the spindle length to ensure your new handle is a good replacement. It is important to determine the type of handle you currently have as there are several sizes.
Inline Espagnolette Handles
Espagnolette handles can be found on most modern double glazed windows and operate multi-point locks that offer improved security. They function by using a 7mm square spindle from the back of the handle, which connects to a gearbox located on the inside of the window frame, which turns multi-locks as it is turned. They are available in a variety of styles comprising cranked, inline key locking and cockspur handle, and they can also be supplied as sets to replace a single handle that is broken or worn out.
Our uPVC replacement handle kits are designed to make it simple to replace a damaged or defective window handle made of espagnolette. These uPVC handle sets come pre packaged with a selection of spindle lengths to suit the majority of applications. They come with all fixing screws required for installation included. They are also available with key plugs, which enable them to be transformed from normal open/close to the egress and fire escape locking handles (if used in conjunction with the proper key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Yale Sparta Inline Espag Handle is another option. It was designed to minimize visual intrusion and has a shorter height at the base. It is part the suited hardware range and comes in a range of finishes that all comply with the requirements of BS EN1670:2007 Grade 5. They have also been tested for endurance and are suitable for use in coastal environments and with acidic timbers. They are also compatible with cylinder immobiliser inserts in order to attain key-locking status when it is required.
Cockspur Handles
Cockspur handles, commonly found on older uPVC or aluminium windows and doors They are a simple latch-and-catch arrangement. The handle nose is attached to or placed into the catch, which is a wedge of plastic mounted on the window frame. The wedges are available in different sizes, and it is essential to know the step height you need before purchasing an alternative handle. As a general rule Upvc windows typically have a step size of 21mm and aluminium frames generally come with a handle step of 9mm.
The cockspur handle is lockable by using a key, bringing security to your home. The lock is fitted into the handle by a spindle, which fits into the handle through the hole in the lock (also known as a backset). The spindle measures 7mm square and can be used to open or close the window.
If you are replacing a handle for a cockspur, it is worth ensuring that the replacement has the same height of step as the original. Usually, this is measured from the base of the spur on the handle to the underside of the nose of the handle. This measurement is often referred to as the backset or stack height and it is essential to know this information prior to purchasing a handle.
Cockspur handles can be straight/universal or cranked, and are available in left hand or right handed versions. This allows the handles to be fitted onto windows that open from the left or right, and to give the operator easier access to the window.
It is important to check whether or not your window requires a restrictor designed to prevent the handle from being opened past a certain level. Generally speaking, they are required for high rise commercial buildings or flats due to security reasons. The majority of domestic homes don't need them.
There are many different styles and colours of cockspur handle, including stainless steel with brushed finishes and white uPVC. Selecting the right one for your windows will depend on your personal preferences and style, as well as how you want your window to perform.
Tilt and Turn Handles
The UK is home to many double-glazed windows that have tilt and turn handles. Both timber and upvc ones come with them. The handle can be rotated at any angle, up to 180 degrees. This allows the window be opened to the room fully and also to lower to let air circulate. The handle is locked in this position and requires a key to unlock it when needed.
This kind of handle is very simple to replace, having just one handle instead of a number of smaller ones. This reduces the appearance of the handle, and is more in line with contemporary minimalist design trends. They are also much easier to clean since they are able to open inwards.
They are also up to 8 times stronger than a conventional casement window. This makes them ideal for doors and windows that are larger. The frames are made from steel cores, which provides additional durability and strength.
The tilt-and turn mechanism is more secure than a casement, because the handle can be locked in any position. This is particularly crucial in areas where children could reside, as it will stop them from accidentally opening the window.
Tilt and turn windows are a common option for a lot of homes, as they can be used in many ways. They can be opened horizontally like windows that are regular, lowered down in a hopper-style to provide ventilation, or tilted backwards for cleaning and maintenance. This is an excellent option for those who wish to improve airflow and decrease the sound in their home. The glass is easily removed and easy to clean and maintain. These windows are available in a variety of sizes and colours. They are ideal for any home and will complement both traditional and contemporary styles.
Crank Handles
Crank handles are simple to use and offer an excellent view of the outside, without obscuring the glass replacement window. They are typically used in casement windows that hinge on the sides or windows with awnings. They have a mechanism similar to a window bar and linkage arm that is used to support the window sash which can be opened or closed by cranking the handle in the clockwise direction. Contrary to other kinds of handles the mechanism of a crank window and handle are subject to significant wear and tear that can cause the gears strip and the handle to cease working or fall off the operator shaft. By inspecting the crank handle and the mechanism of the operator regularly will ensure that they stay in good shape for many years to come.
A crank handle consists of an electronic arm that is connected to a perpendicular rotating shaft. The arm is turned in a circular manner by grabbing it and turning it in the same way that you would operate a sharpener. In certain instances, the handle may be operated by a leg.
The base of a crank handle is hollow. This hole permits the handle to be connected to equipment and machinery. The handle's arm also includes a connecting rod which transforms the circular motion of the handle into rotary or reciprocating motion, which is used to operate machines and equipment.
Boats are typically loaded onto trailers with crank handles, as well as adjusting equipment and machinery. They are typically made of stainless steel which is resistant to corrosion in marine environments. Because of this, most boat crank handles are powder coated to shield them from damage and to make them easier to clean.
Replace your crank handle if it stops working or will not open the window. Before doing this check for screws that attach to the trim inside the window frame's screen track. If there are none, you can use a strong putty blade to release the cover by sliding it between the window jambs and the frame. If that doesn't help then you can take it off and access the crank by unbolting screws in the window frame.
UPVC window handles are available in a variety of styles, but they all have the same locking mechanism. To replace a uPVC window handle, take off the top screw located at the base of the handle. This will reveal two screws.
Then, take a measurement of the spindle length to ensure your new handle is a good replacement. It is important to determine the type of handle you currently have as there are several sizes.
Inline Espagnolette Handles
Espagnolette handles can be found on most modern double glazed windows and operate multi-point locks that offer improved security. They function by using a 7mm square spindle from the back of the handle, which connects to a gearbox located on the inside of the window frame, which turns multi-locks as it is turned. They are available in a variety of styles comprising cranked, inline key locking and cockspur handle, and they can also be supplied as sets to replace a single handle that is broken or worn out.
Our uPVC replacement handle kits are designed to make it simple to replace a damaged or defective window handle made of espagnolette. These uPVC handle sets come pre packaged with a selection of spindle lengths to suit the majority of applications. They come with all fixing screws required for installation included. They are also available with key plugs, which enable them to be transformed from normal open/close to the egress and fire escape locking handles (if used in conjunction with the proper key plug).
If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.
Yale Sparta Inline Espag Handle is another option. It was designed to minimize visual intrusion and has a shorter height at the base. It is part the suited hardware range and comes in a range of finishes that all comply with the requirements of BS EN1670:2007 Grade 5. They have also been tested for endurance and are suitable for use in coastal environments and with acidic timbers. They are also compatible with cylinder immobiliser inserts in order to attain key-locking status when it is required.
Cockspur Handles
Cockspur handles, commonly found on older uPVC or aluminium windows and doors They are a simple latch-and-catch arrangement. The handle nose is attached to or placed into the catch, which is a wedge of plastic mounted on the window frame. The wedges are available in different sizes, and it is essential to know the step height you need before purchasing an alternative handle. As a general rule Upvc windows typically have a step size of 21mm and aluminium frames generally come with a handle step of 9mm.
The cockspur handle is lockable by using a key, bringing security to your home. The lock is fitted into the handle by a spindle, which fits into the handle through the hole in the lock (also known as a backset). The spindle measures 7mm square and can be used to open or close the window.
If you are replacing a handle for a cockspur, it is worth ensuring that the replacement has the same height of step as the original. Usually, this is measured from the base of the spur on the handle to the underside of the nose of the handle. This measurement is often referred to as the backset or stack height and it is essential to know this information prior to purchasing a handle.
Cockspur handles can be straight/universal or cranked, and are available in left hand or right handed versions. This allows the handles to be fitted onto windows that open from the left or right, and to give the operator easier access to the window.
It is important to check whether or not your window requires a restrictor designed to prevent the handle from being opened past a certain level. Generally speaking, they are required for high rise commercial buildings or flats due to security reasons. The majority of domestic homes don't need them.
There are many different styles and colours of cockspur handle, including stainless steel with brushed finishes and white uPVC. Selecting the right one for your windows will depend on your personal preferences and style, as well as how you want your window to perform.
Tilt and Turn Handles
The UK is home to many double-glazed windows that have tilt and turn handles. Both timber and upvc ones come with them. The handle can be rotated at any angle, up to 180 degrees. This allows the window be opened to the room fully and also to lower to let air circulate. The handle is locked in this position and requires a key to unlock it when needed.
This kind of handle is very simple to replace, having just one handle instead of a number of smaller ones. This reduces the appearance of the handle, and is more in line with contemporary minimalist design trends. They are also much easier to clean since they are able to open inwards.
They are also up to 8 times stronger than a conventional casement window. This makes them ideal for doors and windows that are larger. The frames are made from steel cores, which provides additional durability and strength.
The tilt-and turn mechanism is more secure than a casement, because the handle can be locked in any position. This is particularly crucial in areas where children could reside, as it will stop them from accidentally opening the window.
Tilt and turn windows are a common option for a lot of homes, as they can be used in many ways. They can be opened horizontally like windows that are regular, lowered down in a hopper-style to provide ventilation, or tilted backwards for cleaning and maintenance. This is an excellent option for those who wish to improve airflow and decrease the sound in their home. The glass is easily removed and easy to clean and maintain. These windows are available in a variety of sizes and colours. They are ideal for any home and will complement both traditional and contemporary styles.
Crank Handles
Crank handles are simple to use and offer an excellent view of the outside, without obscuring the glass replacement window. They are typically used in casement windows that hinge on the sides or windows with awnings. They have a mechanism similar to a window bar and linkage arm that is used to support the window sash which can be opened or closed by cranking the handle in the clockwise direction. Contrary to other kinds of handles the mechanism of a crank window and handle are subject to significant wear and tear that can cause the gears strip and the handle to cease working or fall off the operator shaft. By inspecting the crank handle and the mechanism of the operator regularly will ensure that they stay in good shape for many years to come.
A crank handle consists of an electronic arm that is connected to a perpendicular rotating shaft. The arm is turned in a circular manner by grabbing it and turning it in the same way that you would operate a sharpener. In certain instances, the handle may be operated by a leg.
The base of a crank handle is hollow. This hole permits the handle to be connected to equipment and machinery. The handle's arm also includes a connecting rod which transforms the circular motion of the handle into rotary or reciprocating motion, which is used to operate machines and equipment.
Boats are typically loaded onto trailers with crank handles, as well as adjusting equipment and machinery. They are typically made of stainless steel which is resistant to corrosion in marine environments. Because of this, most boat crank handles are powder coated to shield them from damage and to make them easier to clean.
Replace your crank handle if it stops working or will not open the window. Before doing this check for screws that attach to the trim inside the window frame's screen track. If there are none, you can use a strong putty blade to release the cover by sliding it between the window jambs and the frame. If that doesn't help then you can take it off and access the crank by unbolting screws in the window frame.