How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of unique steps to add a second ignition key. This requires the use of a handheld computer, known as Tech-2 which is to be used by the dealer. Then the transponder is replaced and a key have to be purchased.

It is recommended to rotate your keys so that one does not get worn out more quickly than the other. This will also keep your keys in pristine condition.

Replacement Case

Unlike the classic saab 9-5 key replacement keys of old keys, the new key fobs have electronics inside which makes it more difficult to make a copy. This has made stealing cars considerably more difficult than it was just a few years ago. However, it has also made the replacement of lost keys an incredibly expensive undertaking.

Every owner of a Saab 9-3 needs to have at a minimum two functioning keys. It's expensive to replace a lost key, as it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers charge between $100 and $200 for this.

There are options to avoid the high cost. Some parts providers will look up the code on an extra key (usually the same one that opens the doors and turns the ignition) and cut a new metal key blade for just a fraction of dealer cost. The key must be the exact identical to the original one for it to function in your vehicle.

You can also change the case yourself by following these steps. You will need to have a flathead and patience. With the screwdriver, slowly break the plastic and separate the emergency keys from the case. Once you have the case open, take the electronics out and put them back into your new case. Insert the correct key and badge into the case.

Replacement Battery

The Saab 9-3 replacement battery is a low-cost part that can be quickly and easily replaced. This DIY video from YouTube Cyclone Cyd will show you how to replace the remote key fob battery in just four steps. This guide should work with any modern saab key fob although the process might differ slightly.

The button is typically located close to the Saab logo on the back of the fob. This button is usually located on the back of the fob, next to the Saab Logo. Use a flathead to insert the screwdriver into the small hole on this button. This will be enough to allow you to open the case of the fob to allow you to replace the battery.

Once the new CR1632 battery is installed, you can reassemble the remote key fob. You can then program it to your car. The procedure should take no more than an hour, if not less. It's a very easy procedure that doesn't require any special tools.

The procedure is a little more complicated if you've lost your key, but it's possible. The dealer will have to find the VIN number of the car and then request a replacement key blade and TWICE module with the exact unique code. Then, they'll have to cut the new key and then program it with a new software tool called MDI.

Replacement Key Fob

The key fob is a device that locks and unlocks your car, it's got a battery within. Batteries are able to last for a short time and will eventually die. It's a common issue with all cars. The good news is you can replace the battery on most key fobs without having to replace the entire case. You can purchase replacement fobs from Amazon that come with all the electronic components already installed, so you'll be able to just pop open the case and replace those batteries that are old. It is necessary to remove the emergency key before you can replace the batteries. To do this, place a small flathead screwsdriver into the slot in the middle. The case will split when you turn the screwdriver around it.

If you're about to replace your keys, ensure you have a spare because this can cut down the total cost by a substantial amount. If you have an extra key, you can ask the dealer to cut it and program it for your vehicle. This is much less expensive than buying a new key fob.

If you don't have a spare one, you can add a second key to your car, however it requires a lot of research and effort. The cost for adding a second key is a few hundred dollars, and also requires programming of the car's computer. This can be accomplished by a professional, however it's a costly option for most owners.

replacement saab car keys Ignition

Unlike the earlier Saab automobiles, the new Saab 9-3 key Replacement 9-3 models feature an advanced alarm system that is dependent on a coded keys. If you lose your only key, it can be costly to get another one since the car must include a computer and also be programmed to accept a new key. Most locksmiths can't do this, and even dealers will charge hundred dollars to program the new key!

If you've lost your sole working key and a dealer is able to replace your car's computer (known as the CIM or SAAB TWICE) to create the replacement, and will charge top dollar for it. We can reprogram the existing EEPROM of your car's computer so that it's ready to accept an additional key. This will save you more than 50% off the price you'd have to pay an auto dealer.

If you've been a long-time owner of a 03-11 SAAB 9-3, you likely are aware that the ignition key isn't really all that robust. If your ignition key isn't working properly, you should look into replacing it. They can become very sticky and the buttons can fall off. Luckily, replacing the ignition key isn't as complicated as it sounds and can be done in a short time using the appropriate tools.