Add a Sparkle to Your Fiat 500 Key Fob

Add a little fun to your Fiat 500 Key Fob with these adorable Silicone Covers. They are simple to install and snap in place of the original black cover.

The silicone covers shield your keys from splashes and dust. They also make your key look more stylish. The signals produced by the remote control for your key are not affected and work flawlessly even when the cover is on.

Protect your key from splashes, dust, and other contaminants

This silicone cover will give a classy look to your key. It is perfectly positioned around the key fob and isn't slipping. It protects your key from dust and splashes. The cover's silicone will not interfere with the signals sent by your key remote, and you can use the keys fob buttons as usual.

Accessorize your fiat 500 remote key programming 500 in Grey or Black with these cool covers. They are ideal if your key cover is beginning to look worn out, scratched or scratched. The covers are made of high-quality silicone. They come with two key rings, so they can be swapped out when you get bored of the same color.

These covers replace the stock black key cover on your car. You'll need to remove the original key cover first before installing these covers.

Looks great

Fiat are an unbeatable and iconic Italian brand, and their cars have a great design that distinguishes them from other brands. These sparkling car key covers are a simple and fun method to add a bit of elegance to your keys without being too overwhelming. They look amazing on your key fob, and can help to refresh an old one.

The covers are designed to replace the black cover. They snap into place with ease. It is a good idea to remove the old cover before installing this.

They come in Grey as well as black. The Fiat 500 new Key cost uk logo is affixed to both. You can always alter it if you decide to! These are also great gifts for Fiat 500 drivers.

Easy to install

Fiat 500 key covers are an easy way to refresh your car keys. You can choose from a variety of colors and styles to find the one that matches your personal style. The best part is that they're simple to put in, meaning you can install them within a matter of ten minutes. You'll need a screwdriver, and some patience. The first step is taking off the original cover. The original cover needs to be removed before the new one is able to be installed.

After you have removed the old cover Once you have removed the old cover, use a flathead screwdriver in order to pry out the four main attachment clips located on the side that is on the passenger side of the fob assembly. They are marked in red on the image below. Also note the locating tab slots shown in yellow that require disengagement as well.

Replace the old battery with a CR2032 coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening of the fob and that the -" negative side is facing toward the rubber buttons.

Reattach the passenger-side mirror cover by aligning locating tabs. Once you've done this take the fob for the driver's side back into the vehicle and test it. Press the push button located on the back of the key. If everything is working as it should the parking lights will be lit and the doors will close.

Easy to remove

Fiat 500 Key Covers are a great way to update your key fob. They're simple to install and provide a unique appearance. They also protect your key fob from smudges and scratches. But, before you put on a new key cover it is necessary to remove the original cover from your vehicle.

This is easily done by pressing the red "Fiat" button located on the front of your key fob. By pressing the button, you will release the lever that allows you to pull out the key ignition switch made of steel (1). After removing the key, you will be able to see a small round silver metal switch with images of a locked and unlocked padlock on top of it. This is the key fob battery switch. The battery is simple to replace by turning the switch for a quarter turn using a small screwdriver that has a flathead.

The key fob has a microchip inside that is used to communicate with the Body Control Module (BCM). When you insert your Fiat key, it presses a button on the ignition switch. This is used to remind you of the "key-inignition". The BCM will then be able to read the transponder inside the key fob and verify that it's a valid.

You can also add a sport design twin pack to your key covers to give it a an unique and funky appearance. These covers snap into place over your existing cover and are available in Cream and Silver. The key cover only works by removing the black cover from your key fob.