how to replace lost subaru key to Get a New Key for Subaru

You can lock and unlock your Subaru with the touch of a button if it has a keyfob. However, if your fob gets dropped in the ocean or gets an immersion in the washer, you may be looking for a way to get it back in working order.

Our Stocker Subaru dealership can help. First, open the key fob case and look for the circuit board that controls the transmitter inside.

How to get a new key

The process of getting a new key to a Subaru is much easier than you think. You can buy a key from a dealer, locksmiths, or even online. The cost will vary based on the location you purchase the key and if it has to be programmed. It also depends on the kind of key (transponder or smart fob? Push to start? Regular non-transponder?)

If you're in search of a new key for your car, it's best to contact an auto locksmith who specializes in Subaru cars. They'll know about unique key fobs, and the key programming that is included with them. You can determine what kind of key you have by taking a look at the sticker on the windshield of your car.

Certain keys come with Remote Start features that allow you to start your vehicle from the comforts of your home. You'll need to have the VIN number for your vehicle which is located on the label that is located in the doorway of the driver, or in the owner's manual.

Subaru models that were manufactured after 2000 have transponder keys that disable the computer in the engine. They aren't possible to duplicate with the same machines used to cut traditional steel keys, so you'll need go to a locksmith dealership for replacements. A new key is typically priced between $50-$250, depending on the type of key and the features.

How to get a replacement key

There are several ways to get the replacement key for your Subaru, based on the type of car you own (chip, intelligent fob or "push to start" remote or a regular key made of metal). You can contact the dealer that you bought the car from for a replacement, or an automotive locksmith who has the proper equipment to make keys like these or even order one online. When you get a new replacement key from the dealership it will be guaranteed to work with your car and is covered by warranty and will be equipped with the appropriate programming for the specific model you have.

If you want a chip-key dealer to have the codes for your specific vehicle. This is only possible at the dealership where you bought the car. This can be an inconvenience because you'll need to either bring your vehicle to the dealership or get an automotive locksmith to come out and code your key on site.

Most hardware stores and locksmiths have a variety of keys that are blank. You'll need a steel key or flathead screwdriver for opening the small tabs at the top of the key fob and let the battery go. Replace the battery with a CR2032 coin cell and then snap the encasement back together.

How do I get a Key Fob

A key fob is a remote device that allows you to control your car's electrical systems. Key fobs can unlock your car, start it and lock it, as well as activate alarms and more. If your Subaru key fob isn't working properly, you may need to replace it. But, you must make sure that you're getting the correct type of fob for your car. According to Consumer Reports, off-brand fobs can cause problems with the immobilizer on your car.

It's possible that your Subaru uses a smart-key technology. These smart keys require specialized programming to function with your vehicle. The dealer should be able to do this, and your warranty or roadside service program could be able to cover the cost.

Older subaru replacement Keys models come with a standard metal lock that can be duplicated at a hardware store. You can also buy blanks from online retailers that sell Subaru logo keys.

You can repair the battery problem on your older Subaru at home without having to visit a mechanic or pay for a key duplication service. You will find a small crevice in the front and the back of the key fob. Use a flathead screwdriver pull the two halves apart. You'll find a flat battery in the inside. Replace the old battery with a 2025 type, making sure the correct side is facing up. Place the key in the slot and snap everything together.

How to replace the Key Fob

In the past it was typical for people to buy a key fob for a low price at a hardware store or online and take it to a locksmith or dealership to be cut and programmed. While this is still an option however, it is recommended to make an appointment with the dealer to avoid the chance of having the key copied and to ensure that the new key fob is correctly programmed for your vehicle. This is crucial if your vehicle has a more recent model that requires specialized programming, such as those that have features like automatic parking and window rolling.

While these fobs enhance the convenience of driving your Subaru in Gilroy However, they can be a hassle if they stop functioning. You can change your fob's battery by yourself in case you're familiar with the process.

Start by finding the small space between the front and back of your key fob. Utilize the tip of a metal key or a flathead screwdriver to pop open the fob, and then look for the flat round battery inside. Take out the old battery and replace it with a 2032-sized battery. Make sure that the battery is facing the same way as the original. Then, put the fob back together.

In the future you may be able to have your car keys replaced with "smart" keys that come with additional features. You will still be able to enjoy the features of your Subaru key fob until then. It will automatically roll down your window when your engine is running.