Ghost Immobiliser Installation

Protect your pride & joy from car thieves by adding a ghost immobiliser. Our TASSA-certified system guards against hacking, key cloning, and vehicle immobiliser bypass.

The system is hidden in the wiring loom of your vehicle, which makes it completely inaccessible to anyone looking. It operates by generating pin code push sequences through buttons already present on the steering wheel, door cards, and the centre console.

No circuit cuts

A car is a prized asset that you put in hours of work to obtain, which is why owners want to protect their vehicle against theft. However, traditional security devices such as alarms and wheel locks could easily be snatched away or taken over by thieves. Ghost Tracker Installation immobilisers are a very effective and efficient solution that operates in silence and isn't easily detected by modern thieves.

Ghost immobilisers are hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle through buttons on the dash, steering wheel and door panels. This creates an individual pincode that is only accessible to you. The code can be changed at any time, and can have up to 20 digits depending on your preferences. It also comes with a secure emergency code that you can utilize in case you forget your PIN.

The ghost immobiliser is also useful to prevent the relay box inside your home from transferring the signal of your car key, which would unlock the doors and start your vehicle. It can even block new techniques of stealing your car such as OBD port hacking. The device is small and weatherproof, which means it's hard to spot and is also difficult to alter with.

Another benefit of the ghost immobiliser is that it can be put to your vehicle without permanent marks. This is ideal for people who plan to resell their car in the near future. It's also much more efficient and less time-consuming to install than an original factory-fitted system.

The Autowatch bmw m2 ghost installer, a cutting-edge technology, is a new generation device that prevents contactless car thefts by connecting to a vehicle's CAN network and using the buttons to generate a unique PIN code. It is a devious device that can be set up without removing wires and does not require any additional key fobs. It also connects to the vehicle's original ECU and prevents thieves from bypassing it by using a new key or replacing the ECU with a "relay". This system has been TASSA-verified and is able to be linked to an International Security Register. Owners can rest assured knowing that their vehicles are secured from theft.

No scanning by RF

You'll want to secure your vehicle from theft when you have spent an enormous amount of money and time customizing it. Installing an immobiliser is among the most effective ways to avoid theft. It will stop your vehicle from starting until you enter an individual code. You can create a 20-digit pin by pressing the buttons on your dashboard and steering wheel. This will ensure that only you are allowed to drive your vehicle. It is also possible to set up a service and valet mode, which will allow you to start your car temporarily without entering the PIN. This allows your technician to work on your car without you being present. This feature is ideal for people who want to save time and make their lives easier.

Ghost immobilisers are next-generation device that connects to your vehicle's CAN data network and utilizes the buttons on the steering wheel and dashboard to program a personal PIN code. It is designed to blend into, as it does not emit any sound or LED indicator. It can be installed anywhere on your vehicle, without affecting the aesthetics.

This stealthy system has been approved by TASSA and can reduce the cost of insurance. It also has the ability to track that allows you to locate your vehicle even if it has been stolen. This is useful if you own a unique or expensive vehicle that you've invested lots of time personalising.

The Autowatch Ghost can be used together with an iPhone app to enable you to start your car remotely in the event you forgot your PIN or not able to access the vehicle due to some reason. This feature is ideal for when you have to collect your kids or run errands but don't want to risk having someone else drive your vehicle. It is also helpful when you have to take your vehicle to a mechanic for maintenance or repair.

The Ghost has the advantage that it does not transmit or detect radio frequency and is therefore undetectable by thieves using RF scanning and code grabbing techniques. It also has the ability to protect your car from key copying and ECU swapping, which are the most common methods used to steal cars.

There is no key to cloning

Ghost immobilisers are a fantastic option for protecting expensive vehicles. They are designed to stop key copying. They stop your car from starting until an additional PIN code is entered alongside the regular key fob. This makes it more difficult for thieves to steal your vehicle, and could stop them from trying. This is a great idea if you have invested a lot of time and money in personalising your vehicle, or own a rare or expensive model.

These immobilisers connect to the vehicle's CAN data network and are completely hidden, meaning that there is no visible sign of its presence within the vehicle. The device is also difficult to identify using radio frequency scanning technology or code grabbing. This means that a burglar will have to spend much longer in order to get your car.

To get around the system, thieves need to know the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can change it as often as you need to. The pin code you choose is easy to remember, but mathematically impossible for anyone else to decipher. The engineer will also provide an emergency PIN code in case you forget the pin.

The Ghost CAN Bus immobiliser could be easily mounted anywhere on your vehicle. It can be used with all vehicles and can be completely customized to match your car's look. It is also extremely cost-effective and simple to use. You can even transfer the device to another vehicle if you switch vehicles in the course of ownership, provided that the new vehicle what is ghost immobiliser compatible with the.

The immobiliser for the CAN bus is compatible with many other security features. For instance, it could detect the damage to your vehicle and alert the owner. It could also stop the engine if the car is tampered with. It also helps protect your vehicle from key cloning and hacking. It can also detect any vibrations or contact with the vehicle. Additionally, it will notify the owner that the vehicle has been moved.

No OBD port hacking

Ghost is a hidden device that is connected to the CAN data network of your vehicle. This will stop thieves from hacking in to disable your alarm, deactivate your key fob, or make new keys. This technology is a major improvement over the methods used by thieves in the past to steal your vehicle. The CAN data network also means that the system won't be affected by disconnecting or replacing your battery.

The Autowatch Ghost is the first aftermarket CAN bus that is a non-detectable immobiliser that protects against key-cloning, hacking and replica car theft. It does not use LED indicators or key fobs. Instead, it uses the buttons on your steering wheel, console and door panels.

Modern thieves use diagnostics to detect cuts in the circuit on your vehicle and can bypass immobilisers that require lots of wiring or are integrated into the wiring. The Ghost is weatherproof, doesn't require additional wiring and cannot be identified by diagnostic tools that are professional. It can even be installed on vehicles that are fitted with anti-theft devices.

A Ghost immobiliser comes with a major advantage: your vehicle will only be started by someone who knows your PIN and physically has access to your vehicle. This is a significant advantage over traditional security systems which are able to be bypassed using cable tampering, a screwdriver or the use of an universal remote controller.

If you forget your PIN you can reset it with the emergency PIN override function on a mobile device or computer. This is useful if you need to start your car after it's in a garage, or valet parking.

The Autowatch Ghost 2 is the most recent version of the product, and is approved for insurance by TASSA when installed by one of our authorised installers. It features the QR fingerprint system to identify parts that are not in use that allow for the return of stolen items in the event that they are discovered. It can also be set to'service mode' which permits the engine to start when your car is in a garage, or with valet parking but you will need to enter your PIN code again to exit the vehicle.