Reasons Why Your Nissan Qashqai Key Fob Won't Work

The Qashqai's greater dimensions give it an SUV-like feel. Its ride on 19-inch alloy wheels in Ti and STL versions can also be firm. The front tyres in the Qashqai are also prone to losing grip on bumpy surfaces, and the CVT may occasionally display a wrist-flexing torque steering.

This is usually caused by an unresponsive battery that can be replaced in a matter of minutes. Make sure the replacement battery is of the same voltage, size and specifications.

Water Damage

One of the most common reasons that a Nissan key fob will give the "key ID is incorrect" message is due to water damage. The rubber seals on the key fob protect the chip's electronics, but prolonged moisture exposure can cause it to stop working effectively. It is common to observe this when your key fob was dropped into the ocean or swimming pool. However, it could also occur when it is wet due to rain or soapy hands.

If your key fob has been exposed to water over many years and you're not sure, clean it with isopropyl, or an electronic cleaner. Or, it could require the attention of a professional to repair or replace it.

If your key fob requires to be replaced, it is a relatively simple procedure. Make sure you have the right multipack (CR2032 3V). Unlock the front and rear cases with a flathead screwdriver. Remove the metal clips, then remove the battery that was in place and replace it. Reassemble the fob and replace the mechanical key. Verify that it is working correctly. If it isn't then you'll have to take it to an Nissan dealer or professional auto locksmith to replace the key chip. The chip isn't usually damaged by water so it should not cost a lot.

Dead Coin Battery

The coin battery is a second common reason why your Nissan Qashqai remote key fob might not function. The batteries last for about three to five years, however they can become faulty over time if the fob has been frequently dropped. You can replace the battery with a fresh one but be sure it's the same size and voltage as the original. If you are using another battery, it may cause the key to have an untrue key ID, which can prevent it from pairing with your vehicle.

The most efficient method of replacing the battery on the Nissan Qashqai key fob is by opening the key fob using an small screwdriver that has a flat head. The screwdriver must be inserted into a small cut on the bottom of the key fob. The screwdriver should be gently twisted to split the two halves. Then, remove the old CR2025 button cell battery and replace it with the new one after confirming its position in the fob.

Before putting the new battery into place ensure that there isn't any dirt or water damage to the terminals. If there is, wash the terminals using a small amount of isopropyl alcohol. You'll also want to make sure the pole cables are connected correctly. They must be connected to the negative and positive poles of the battery.

Diagnostics of a fault

If your Nissan Qashqai key fob stops working after exposure to clean tap water or rain it could be a sign of an internal chip issue. Change the battery won't fix this issue, and you'll have to purchase a new key fob. If the key fob stopped working after you dropped it, it's likely that the chip inside was damaged. If you clean the chip with isopropylethanol and paper towels, then replace it in the key fob, it is possible to generally get it working.

A common error that you might see on the dashboard of your vehicle is "Key ID Not Correct." The vehicle is unable recognize the key fob, which is why it won't allow the car to start. The problem can be caused by a variety of things including water damage, undetectable malfunctions in the circuitry of the key fob or RFID interference.

The key fob will not function in the event that the batteries with 12 volts are not working or provide enough electric current. This could affect your Nissan Qashqai's keyless system, central locking and the ability to start the engine using the key fob. If you're unable lock or unlock the door manually, you should check the batteries on the key fob to make sure they are in good condition. You may also try reinstalling the battery to reset your transmitter.

Reprogramming

If the key fob was not submerged in saltwater the device should be able to come back to life with a simple wash of clean water. You can also try cleaning the electronic chip with isopropyl alcohol or an electronic cleaner. If none of these works it is possible to replace the key fob.

If your Nissan Intelligent Key still does not work, it might be a problem connecting between it and the vehicle. Start by turning the ignition switch without starting the vehicle. Continue this process until the hazard lights flash twice. After that, turn the car off and take out the keys nissan.

Open the fob compartment in your vehicle. It's usually found on the door jamb or the handle of the door for the driver. Find the small "program" button and press it. You will hear a chime after the process is completed.

Now that your Intelligent Key is relinked to the car is the time to test it out. Press all the buttons on the key while you are at a distance from the car. If the lights flash and the horn squeaks this means that the key has successfully connected to the nissan key Fob repair. You can also test it close to the Nissan.